新聞中心

EEPW首頁 > 手機與無線通信 > 設計應用 > 基于MCP200x設計的LIN雙向半雙工通信方案

基于MCP200x設計的LIN雙向半雙工通信方案

作者: 時間:2010-06-06 來源:網絡 收藏

This device provides a bidirectional, half-duplex communication physical interface to automotive and industrial systems to meet the bus specification Revision 2.1 and SAE J2602. The device is short circuit and overtemperature protected by internal circuitry.The device has been specifically designed to operate in the automotive operating environment and will survive all specified transient conditions while meeting all of thestringent quiescent current requirements.

MCP200X family members:

8-pin PDIP, DFN and SOIC packages:

- MCP2003, -compatible driver, with WAKE pins

- MCP2004, LIN-compatible driver, with FAULT/TXE pins

系列主要特性:

The MCP2003 and MCP2004 are compliant with LIN Bus Specifications 1.3, 2.0 and 2.1 and are compliant to SAE J2602

Support Baud Rates up to 20 Kbaudwith LIN-compatible output driver

43V load dump protected

Very low EMI meets stringent OEM requirements

Very high ESD immunity:

- >20kV on VBB (IEC 61000-4-2)

- >14kV on LBUS (IEC 61000-4-2)

Very high immunity to RF disturbances meets stringent OEM requirements

Wide supply voltage, 6.0V-27.0V continuous

Extended Temperature Range: -40 to +125℃

Interface to PIC® MCU EUSART and standard USARTs

Local Interconnect Network (LIN) bus pin:

- Internal pull-up resistor and diode

- Protected against battery shorts

- Protected against loss of ground

- High current drive

Automatic thermal shutdown

Low-power mode:

- Receiver monitoring bus and transmitter off, (5 μA)

應用:

The MCP2003/4 transceivers are appropriate for applications in the automotive market, including rain sensors, sunroofs, window lift and many other sensor or actuator-based systems. The devices are also appropriate for many non-automotive applications, including those in the industrial (e.g. large lawn mowers, golf carts, metering and door locks); medical (e.g. motors and control panels on wheel chairs, and hospital beds); and appliance markets (e.g. washing machine and stove control panels and sensors).


圖1.MCP2003方框圖

圖2.MCP2004方框圖


上一頁 1 2 下一頁

評論


相關推薦

技術專區(qū)

關閉